Cleaning an epoxy garage floor coating is an easy process. In fact, one of the primary reasons for having a floor coating is for the ease of maintenance. There are some basic cleaning tips for epoxy floors that you should be aware of, however, that will help insure a nice clean surface for years to come. These cleaning tips are the same for polyurea, polyurethane, and polyaspartic garage floor coatings as well.
As resilient as garage floors coatings are to dirt and stains, they do require some cleaning maintenance to keep their shine. If not, some coatings can start to loose their gloss due to the sanding effect of the loose dirt and grime that gets caught up under shoes and tires.
Another issue to be aware of is that some cleaners can leave a film on the surface while others may de-gloss the shine or cause it to fade. So let’s take a look at what cleaners to use and what not to use, as well as some recommended cleaning methods.
EPOXY FLOOR CLEANING AND MAINTENANCE
The first thing we recommend is getting yourself a quality 24” to 36” dust mop. You can find these at your local home improvement centers
Since dust and dirt do not stick to the floor, just use the dust mop once a week (or sooner if needed) to keep the floor clean. It only takes a few minutes and you are done. They even work well for floors that have a polymer anti-slip additive in the surface.
If you have a floor coating with an aggressive anti-slip aggregate such as aluminum oxide or you don’t care for dust mops for a particular reason, then a soft bristle push broom make for a great choice as well.
For garage floor coatings with contraction joints or saw cuts in the floor, vacuum them out monthly or use a broom to sweep them clean of debris.
Spot cleaning for spills or fluid leaks from cars can easily be wiped up with a paper towel, soft cloth, or a clean rag. A shot of Windex works wonders if the spill has left a film.
HEAVY DUTY CLEANING
For epoxy garage floor coatings that see a lot of traffic and dirt, it’s a good idea to give your floor a good cleaning once every 3 or 4 months. The best cleaning tools for this is a good quality hard foam mop or microfiber mop. Though some people swear by them, we are not the biggest fan of string mops. They just don’t scrub very well and have a tendency to leave streaks on glossy finishes.
CLEANING SOLUTIONS
Windex is another solution that will give you a little bit more cleaning power if it’s needed. Mix a ratio of 1 part Windex to 3 parts water. The chemicals in Windex will not leave a film on the coating and do a good job of cutting through residue.
For spot cleaning any stubborn dirt that you encounter, a soft scrub pad can be used. Just don’t scrub too hard or you may degloss the surface.
When using any of these methods you can just let the floor air dry. You can also wipe it down with a lint free towel if you prefer.
For rust stains, we recommend using a 1:1 ratio of CLR and warm water. Apply it directly to the rust spot using a scrub brush or soft scrub pad and then rinse with cold clean water. Do not let it sit for more than a minute or two on the surface.
DO NOT USE THESE CLEANERS ON GARAGE FLOOR COATINGS
When cleaning your garage floor coating, do not use citrus cleaners or vinegar. These types of cleaners contain acids that can slowly degloss the finish of epoxy and other floor coatings over time.
Don’t use cleaners with soap in them as well. Soap can leave streak marks and a hazy film on the surface that impedes the shine of the finish. The soapy film can also make the floor much more slippery when it gets wet.
Cleaning an epoxy garage floor coating should be easy. Just use these cleaning tips and methods for your quick and easy floor coating maintenance. Doing so will help to maintain a cleaner looking floor that will hold its gloss and finish for a longer period of time.
Call AP Painting Solutions Ltd. to Make an Appointment to quote your project’s needs.
